Ana-Box™ – Closed Loop Analog Sensor Interface
|
| |
|
 |
Description:
- Vary the pumping rate in proportion to a variable voltage input
- Start or stop pump at set voltages
- Vary the pumping rate to maintain a voltage window
- Attaches to any pump in the NE-1000 Family
- Detailed description...
|
Part ID: |
ADPT-ANABOX |
Price: |
US $99 |
|
|
Foot Switch |
| |
|
 |
Description:
- Start, stop, or trigger the next phase on your syringe pump
- Attach to an NE-500 to allow stand-alone operation
- Utilizes the TTL logic port on syringe pump
- Quick and simple setup
|
Part ID: |
ADPT-2 |
Price: |
US $45 |
|
|
Pump-to-PC Primary Network Cable |
| |
|
 |
Description:
- Allows full control over syringe pumps through your computer
- DB-9 adapter connects to 9-pin serial port (25-pin adapters available upon request)
- Utilizes the RS-232 communications port of syringe pump
- Available in 7' and 25' length cable
- Quick and simple setup
- Download free pump terminal emulator
|
Part ID: |
CBL-PC-PUMP-7 (7ft. cable) |
Price: |
US $15 (7ft.) |
| |
CBL-PC-PUMP-25 (25ft. cable) |
|
US $17 (25ft.) |
RS-232 to USB Converter
|
 |
Description:
- Adapter to add a DB-9 RS-232 serial port to your computer by using an USB port
- Includes software driver CD
|
Part ID: |
CBL-USB232 |
Price: |
US $15 |
| |
When purchased with our primary cable or starter kit |
|
US $10 |
|
|
Pump-to-Pump Secondary Network Cable |
| |
|
 |
Description:
-
Allows networking of two or more syringe pumps to a single computer
-
Quick and simple setup
-
Utilizes the RS-232 communications port of syringe pump
-
Available in 7' and 25' length cable
-
Requires first pump to be connected with primary network cable
|
Part ID: |
CBL-NET-7 (7ft. cable) |
Price: |
US $2 (7ft.) |
|
CBL-NET-25 (25ft. cable) |
|
US $4 (25ft.) |
|
|
Dual Pump Plumbing Kit |
| |
|
 |
Description:
- For use with our continuous infusion system or dual infusion system
- Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line
- The kit is pre-assembled, all you need to do is plug in the syringes
- Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservior and one for output; each Y-connector has 5' of tubing to make connections to your application. Two 60cc Terumo syringes are included
- Individual parts are also available
|
Part ID: |
P-DKIT |
Price: |
US $20 |
|
Pump Synchronization Cable |
| |
|
 |
Description:
- Used for creating a continuous infusion system or dual infusion system
- Establishes a communications link between two pumps to duplicate the exact or inverse commands issued to one pump.
- Utilizes the RS-232 logic port on syringe pump
- Quick and simple setup
- This is the new replacement cable for CBL-TTL-1 unless the use of the TTL ports for synchronization is preferred
|
Part ID: |
CBL-DUAL |
Price: |
US $20 |
| |
|
 |
Description:
- Used for creating a continuous infusion system or dual infusion system
- Synchronize pumping direction of two syringe pumps so that they change directions, start, and stop as one unit
- Utilizes the TTL logic port on syringe pump - See new version above for using the RS-232 ports
- 7' cable
- Quick and simple setup
|
Part ID: |
CBL-TTL-1 |
Price: |
US $20 |
|
|
"Lockout Disable" Key |
| |
|
 |
Description:
- For use with the syringe pump's "Lockout Mode"
- Prevent unauthorized or accidental changes to the settings by locking the keypad
- The "Lockout Disable" key unlocks the keypad and allows settings to be changed
- Utilizes the TTL logic port on syringe pump
- Quick and simple setup
|
Part ID: |
ADPT-LOCKOUT |
Price: |
US $10 |
|
|
OEM Starter Kit: For NE-5xx OEM models only |
| |
|
 |
Description:
|
Part ID: |
OEM-STARTER |
Price: |
US $25 |
|
Part ID: |
OEM-NET |
Price: |
US $10 |
|
Power supply and secondary cable only |
|
|
|
|
Single Valve Control Box |
| |
|
Description:
- Attach your 12V DC valve and the control box will open or close your valve according to the pumping direction
- Utilizes the TTL logic port on syringe pump
- Includes power supply for valve
|
Part ID: |
ADPT-VALVE-INTERFACE-1 |
Price: |
US $85 |
|
Dual Valve Control Box |
| |
|
Description:
- Attach your two 12V DC valves and the control box will open or close your valves according to the pumping directions of your two pumps
- Includes CBL-TTL-1 cable to allow synchonized pumping between two pumps
- Utilizes the TTL logic ports on both syringe pumps
- Includes power supply for valves
|
Part ID: |
ADPT-VALVE-INTERFACE-2 |
Price: |
US $100 |
|
|
|
|
| |
|
 |
Description:
- Communicates with any pump in the NE-1000 Family
- DOS-level terminal emulator
- Provides an interactive user interface for communications
- Command file features
- Click here to download
|
Part ID: |
PUMP-TERM |
Price: |
FREE |
|
|
|
| |
|
 |
Description:
|
Part ID: |
WinPumpControl |
Price: |
Shareware |
|
|
|
| |
|
 |
Description:
|
Part ID: |
WinPumpTerm |
Price: |
Free |
|
|
