Example Applications

In the many years that we have been designing and manufacturing syringe pumps, we have come across hundreds of applications. If your application is not listed or if you have a new application, please give us a call at (631)249-1392

Quickly and economically create a continuous operation dispensing system with 2 pumps in reciprocating operation. With just an automation cable and a valve system, the pumps can be synchronized to infuse while the other is refilling, and start and stop simultaneously.

Control a chemical's concentraion from an external voltage source. Using 2 pumps, one for the chemical and one for the dilution fluid, attach each pump to an Ana-Box(tm) analog controller. With both pump systems attached to the same voltage control, as the chemcial pump changes flow rate, the dilution fluid compensates its flow rate to add up to a constant flow rate system.

The NE-1000 can be setup as an automated dispensing system which dispenses a set volume after a programmed time delay. Then after each dispense, a small volume can be sucked back to prevent dripping.

A multiple chemical dispensing application can be implemented with multiple pumps. The pumps can be configured to send signals between them to synchronize the dispense and react to changes in sensors.

Setup an infusion/withdrawal dispensing system to automatically synchronize itself after a power failure by attaching a refill sensor.

Pre-program an entire production shift's dispenses on an automated production line. Each dispense can be a different volume and flow rate. Change flow rates during dispenses. Synchronize the start of each dispense with an external signal from other equipment, the operator pressing the 'Start' button, pressing a foot switch, or automatically after a time delay. Have the pump sound a beep to alert the operator at any time.

Prevent dripping after a dispense by programming a volume to be sucked back after each dispense.