|
RevSpin™ Mini-Centrifuges
|
|
|
C112 RevSpin™ Mini-Centrifuge
|
 |
Model: C112 |
Price: US $275 |
Description:
The C112 is stronger, faster, and has more than twice the capacity of competing palm-sized mini-centrifuges. The C112 is a compact, countertop centrifuge with a 4-position switch: Off/Pulse/6,000 RPM/10,000 RPM. The high capacity 16-position rotor receives 1.5 or 2.0 ml tubes. Oversized soft rubber base absorbs vibration and stops bench walking. Rapid slow down, from 10,000 RPM to zero in approximately 20 seconds.
- Stronger, faster, and more than twice the capacity of competing palm-sized microcentrifuges
- Easily the most powerful centrifuge in its price range.
- Fast enough for DNA research, but inexpensive enough for any lab or individual at just $275.
|
Features:
- 4-position switch (off / pulse / low / high)
- Easy-to-read graphics indicating both RPM and RCF
- Multiple speeds - 6,000 or 10,000 RPM
- Pulse feature for short spins
- High-capacity 16 position rotor
- Positions clearly numbered
- Accepts 1.5 - 2.0ml tubes
- Optional 0.2ml strip rotor available
- Easyload rotor permits tubes to be loaded vertically, but spin in 45° position
- Oversized soft rubber base efficiently absorbs vibration, reduces noise and vibration transmitted to bench, stops bench walking, resists tipping, and absorbs impact from careless handling.
- Reasonably priced extra rotors to accommodate large classrooms.
- Oversized 8mm shaft will not bend from abuse or imbalance.
- Forced air ventilation assures specimens, rotor and motor stay cool, even during extended runs.
- Safety switch instantly stops rotor if lid is slightly ajar, will not operate without cover in place.
- Grounded cord, double insulated construction.
- Precision manufacturing: Made in the USA!
- Two-year warranty
|
Product Specifications
Model No.: C112
Power Requirements: 100 - 120 VAC 60 HZ 1.5 amps, grounded
cord
Net Weight: 5 lb. (shipping weight 6 lb.)
Dimensions: 9 inches tall x 7 inches diameter
Motor: Ball bearing, high-efficiency, permanent magnet DC
Speeds: Off / Pulse / 6000 RPM / 10000 RPM
RPM: 6000 (low) or 10000 (high)
RCF: Low - 1735 / 2245, High - 4819 / 6238 (lower level /
upper level)
Rotor capacity: 16 tubes, 1.5 - 2.0ml. Optional 0.2ml strip
rotor available.
Rotor type: 45°, vertical loading
Warranty: 2 year, repair or replacement
|
C220 RevSpin™ Mini-Centrifuge
|
 |
Model: C220
|
Price: US $600
|
Description:
The C220 is the only microcentrifuge equipped with multiple speeds,
digital timer and electronic imbalance detection system for under
$1,000 retail (just $600, actually!). The C220 has multiple speeds
up to10,000 RPM and includes a pulse feature for short spins. The
imbalance detection system instantly cuts power to the motor to
prevent damage. Automated switching circuit allows operation from
100-230 VAC. The high capacity 16-position rotor receives 1.5 or
2.0 ml tubes, optional 0.2ml strip rotors are also available. Oversized
soft rubber base absorbs vibration and stops bench walking. Rapid
slow down, from 10,000 RPM to zero in approx. 20 seconds.
- Less than half the price of any other centrifuge with imbalance
detection
- Stronger, faster, and more than twice the capacity of competing
palm-sized microcentrifuges
- Top-quality precision manufacturing, 2-year warranty
|
Features:
- Digital display
- Imbalance detection system
- Programmable timer
- Five speed selections up to 10,000 RPM
- Pulse feature for short spins
- High-capacity 16 position rotor
- Positions clearly numbered
- Accepts 1.5 - 2.0ml tubes
- Optional 0.2ml strip rotor available
- Easyload rotor permits tubes to be loaded vertically, but spin in 45° position
- Oversized soft rubber base efficiently absorbs vibration, reduces noise and vibration transmitted to bench, stops bench walking, resists tipping, and absorbs impact from careless handling.
- Reasonably priced extra rotors to accommodate large classrooms.
- Oversized 8mm shaft will not bend from abuse or imbalance.
- Forced air ventilation assures specimens, rotor and motor stay cool, even during extended runs.
- Safety switch instantly stops rotor if lid is slightly ajar, will not operate without cover in place.
- Grounded cord, double insulated construction.
- Precision manufacturing: Made in the USA!
- Two-year warranty
|
Product Specifications
Model No.: C220
Power Requirements: 100 - 230 VAC 50-60 HZ 1.5 amps, grounded cord
Net Weight: 5 lb. (shipping weight 7 lb.)
Dimensions: 9 inches tall x 7 inches diameter
Motor: Ball bearing, high-efficiency, permanent magnet DC
Timer: 60 minute digital timer
RPM: 10,000 (max)
RCF: 6,238 (max)
Rotor capacity: 16 tubes, 1.5 - 2.0ml. Optional 0.2ml strip rotor available.
Rotor type: 45°, vertical loading
Warranty: 2 year, repair or replacement
|
|
|
|
|
