Syringes & Plumbing Supplies
Disposable Plastic Syringes & Plumbing Supplies Stainless Steel Syringes, Fittings & Orings Standard Glass Syringes & Gas Tight Glass Syringes
Disposable Plastic Syringes
Plumbing Supplies
Stainless Steel Syringes
Fittings & O'Rings
Standard Glass Syringes
Gas Tight Glass Syringes

Peristaltic Pump Supplies

Note: All syringes & plumbing supplies are non-returnable

Disposable Plastic Syringes

NORM-JECT®/HENKE-JECT® inert syringes are latex free, contain no rubber, no silicone oil, styrene or DEHP and are DNA free. These syringes are the choice for any situation needing an inert, non-reactive syringe. They are more chemically resistant than rubber tipped syringes. Manufactured only from laboratory grade polypropylene and polyethylene. These unique plastic syringes have a positive safety stop to prevent accidental spills.

Order Online for Plastic Syringes
Download Brochure 
Plastic SyringesPrice
SizeBrandTipType EachPer Box10 Boxes
0.5 mLAir-Tite®Luer Lock
Low
Dead Space
---- SYR-AT05LL
$1.14
SYR-AT05LLBX
$77.45
(100 per box)
SYR-AT05LLCS
$700.00
1 mL Norm-Ject®Luer Slip
Low
Dead Space
Inert SYR-TB1
$0.53
SYR-TB1BX
$52.00
(100 per box)
SYR-TB1CS
$520.00
1 mLExel®Luer Lock----SYR-EX1LL
$0.70
SYR-EX1LLBX
$69.00
(100 per box)
SYR-EX1LLCS
$690.00
3 mLNorm-Ject®Luer LockInertSYR-NJ3LL
$0.64
SYR-NJ3LLBX
$63.00
(100 per box)
SYR-NJ3LLCS
$630.00
5 mLNorm-Ject®Luer LockInertSYR-NJ5LL
$0.70
SYR-NJ5LLBX
$69.00
(100 per box)
SYR-NJ5LLCS
$690.00
10 mLNorm-Ject®Luer LockInertSYR-NJ10LL
$0.81
SYR-NJ10LLBX
$80.00
(100 per box)
SYR-NJ10LLCS
$800.00
20 mLNorm-Ject®Luer LockInertSYR-NJ20LL
$1.11
SYR-NJ20LLBX
$110.00
(100 per box)
SYR-NJ20LLCS
$1100.00
30 mLHenke-Ject®Luer LockInertSYR-NJ30LL
$1.70
Limited Invetory
- Discontinued by Manufacturer -
50 mLAir-Tite®Luer LockInertSYR-AT50LL
$1.80
SYR-AT50LLBX
$52.00
(30 per box)
SYR-AT50LLCS
$500.00
60 mLTerumo®Luer Lock----SYR-TER60LL
$1.75
SYR-TER60LLBX
$31.25
(25 per box)
SYR-TER60LLCS
$300.00
140 mLMonoject®Luer Lock---- - Discontinued by Manufacturer -

Large Syringe Kit Large Syringe Kit
Model: P-SYRKIT-LG
Price: $24.34 USD


• (2) 20 mL Norm-Ject® Luer Lock Inert
• (2) 30 mL Henke-Ject® Luer Lock Inert
• (2) 60 mL Terumo® Luer Lock
• (6) Female Luer Barbs 0.125"ID
• (3) Male Luer Barbs 0.125"ID
• (20 ft) PVC Tubing 0.125"ID x 0.188"OD

Small Syringe Kit Small Syringe Kit
Model: P-SYRKIT-SM
Price: $20.38 USD


• (2) 1 mL Norm-Ject® Luer Slip Inert
• (2) 3 mL Norm-Ject® Luer Lock Inert
• (2) 5 mL Norm-Ject® Luer Lock Inert
• (2) 10 mL Norm-Ject® Luer Lock Inert
• (6) Female Luer Barbs 0.125"ID
• (3) Male Luer Barbs 0.125"ID
• (20 ft) PVC Tubing 0.125"ID x 0.188"OD

Dual Pump Plumbing Kit
Model: P-DKIT
Price: $20.84 USD


Dual Pump Plumbing Kit For use with our advanced Continuous/Dual Infusion Systems
• (2) Dual Check valves
• (2) 50 mL Air-Tite® syringes
• (2) "Y" Connectors
• Withdraw pulls fluid from a reservoir
• Infusion out flows to a separate line
• Comes pre-assembled: Just attach the syringes
• Assembled with 0.125"ID PVC tubing:
6" connects the valves to the "Y" connectors, 5' to connect to your reservoir and out flow
• Parts can be purchased individually • Functional description

Glass Syringes
Standard Glass Syringes Gas Tight Glass Syringes
Standard Glass Syringes Gas Tight Glass Syringes

New Era Pump Systems, Inc. supplies a full range of glass syringes from 1 mL to 100 mL standard and 50 µL to 100 mL in gas tight syringes. Standard glass can handle between 22 to 43 psi and the gas tight can handle from 100 psi to upwards of 400 psi depending on the syringe.

Standard Glass Syringes

For Laboratory & Veterinary use only. Manufactured under ISO9001 standards in Germany from the finest Borosilicate Glass. Individually boxed. Pistons and barrels are interchangeable.
Order Online for Standard Glass Syringes
Download Brochure  Back to Top
Syringe
Size
Fitting PSI Temperature Model # Price
Each
1 mLFixed Metal Luer Lock43.5200°CSYR-GL1LL$43.00
2 mLFixed Metal Luer Lock43.5200°CSYR-GL2LL$32.00
3 mLFixed Metal Luer Lock43.5200°CSYR-GL3LL$32.00
5 mLFixed Metal Luer Lock43.5200°CSYR-GL5LL$32.00
10 mLFixed Metal Luer Lock29200°CSYR-GL10LL$40.80
20 mLFixed Metal Luer Lock29200°CSYR-GL20LL$48.50
30 mL (+)Fixed Metal Luer Lock29200°CSYR-GL30LL$69.40
50 mL (+)Fixed Metal Luer Lock21.8200°CSYR-GL50LL$92.50
100 mL (+)Fixed Metal Luer Lock21.8200°CSYR-GL100LL$312.50

SGE PTFE Tipped Plunger Gas Tight Glass Syringes

A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
Order Online for SGE Gas Tight Glass Syringes
Syringe
Size
Fitting PSI Temperature Model # Price
Each
50 µLFixed Metal Luer Lock40070°CSYR-GL50MCLL-S$112.70
100 µLFixed Metal Luer Lock40070°CSYR-GL100MCLL-S$89.50
250 µLFixed Metal Luer Lock40070°CSYR-GL250MCLL-S$86.70
500 µLFixed Metal Luer Lock40070°CSYR-GL500MCLL-S$89.50
1 mL (*)Fixed Metal Luer Lock40070°CSYR-GL1LL-S$81.90
2.5 mL (*)Fixed Metal Luer Lock40070°CSYR-GL2.5LL-S$79.30
5 mL (*)Fixed Metal Luer Lock40070°CSYR-GL5LL-S$79.30
10 mL (*)Fixed Metal Luer Lock20070°CSYR-GL10LL-S$141.50
25 mL (*)Fixed Metal Luer Lock10070°CSYR-GL25LL-S$236.10
50 mL (+)Removable Luer Lock
7/16 UNEF Metal Thread
100120°CSYR-GL50LL-S$296.20
100 mL (++)Removable Luer Lock
7/16 UNEF Metal Thread
100120°CSYR-GL100LL-S$449.60
Replacement Luer Lock: 7/16 UNEF Metal ThreadSYRP-SSML-S$61.26

Pusher Block Modification Kits for Indicated Glass Syringes

Select by pump model series and syringe reference (+, ++, *). Improves fit of certain glass syringes in the pusher block.
NE-10xx, NE-5xx, NE-5xxL NE-4000, NE-450x, NE-450xL
Part # Price Part # Price
(+)ANTISYPHON-MOD-01$2.00ANTISYPHON-MOD-DBL-01$3.00
(++)ANTISYPHON-MOD-02$10.00ANTISYPHON-MOD-DBL-02$13.00
(*)Plunger Adapter Plate, 6-32 ThreadP-SYRADPT$5.00

Stainless Steel Syringes & Parts
Stainless Steel Syringes Fittings Orings
Stainless Steel Syringes Fittings O'Rings

Stainless Steel Syringes

These syringes are intended for high pressure applications with good resistance to most aggressive liquids. All syringe barrels and plungers are manufactured with #316 stainless steel. Syringes are fully autoclavable.

Syringes are guaranteed to be leak free to pressures in excess of 750 psi.
8 mL syringes are guaranteed to be leak free to pressures in excess of 1500 psi.

3 Viton® O'Rings are included with each syringe. 2 on the plunger, 1 on the tip. Replacement O'Ring sets in Viton® or Markez® materials are available.

Markez® O'Rings have almost universal chemical compatibility: Inorganic, Organic Acids, Alkine; Ketones, Esters, Ethers, Aldehydes; Chemicals relevent to Petro-Chem equipment; Sour gas; Solvents. Temperature to 608°F (320°C).

Note: Stainless Steel syringes and parts are non-cancelable and non-returnable. Verify availability and lead times when placing orders.

Order Stainless Steel syringes and fittings separately. Choose either Luer Lock or SwageLok fittings, listed below the Stainless Steel syringes.
Download Brochure  Back to Top
Syringe
Size
Maximum
PSI
Tip
Thread
Model # Price
Each
1 mL 7501/4-28F SYR-SS1$500.50
3 mL 7501/4-28F SYR-SS3$518.10
5 mL 7501/4-28F SYR-SS5$506.00
8 mL 15001/4-28F SYR-SS8$707.30
20 mL 7503/8-24F SYR-SS20$632.50
50 mL 7503/8-24F SYR-SS50$728.20
100 mL 7503/8-24F SYR-SS100$748.00
200 mL 7503/8-24F SYR-SS200$829.40

Fittings for Stainless Steel Syringes

Made from #316 stainless steel construction.
Fittings
for
Stainless Steel
Syringes
Compatible with Listed Syringe Sizes:
1, 3, 5 & 8 mL
Thread: 1/4-28M
20, 50, 100 & 200 mL
Thread: 3/8-24M
Model #PriceModel #Price
Luer Lock SYRP-SSS-LL$111.10 SYRP-SSL-LL$105.60
1/16" SwageLok SYRP-SSS-SL16$100.10SYRP-SSL-SL16$105.60
1/8" SwageLok SYRP-SSS-SL8$100.10 SYRP-SSL-SL8$105.60
1/4" SwageLok ---- ---- SYRP-SSL-SL4$105.60

Replacement O'Rings for Stainless Steel Syringes

O'Rings insure against leakage. Syringes are guaranteed to be leak free to pressures in excess of 700 PSI. Stainless Steel Syringes come standard with Viton® O'Rings. Markez® O'Rings are ordered separately and are for applications requiring higher chemical resistance. Each syringe uses 3 O'Rings, which are included in each set.
Replacement O'Ring
Set Type
for Stainless Steel
Syringe Sizes
Model #
(Set of 3)
Price
Each
Viton®1, 3 & 8 mLSYRP-SSORV8$45.10
5 mLSYRP-SSORV5$45.10
20 mLSYRP-SSORV20$45.10
50 mLSYRP-SSORV50$45.10
100 mLSYRP-SSORV100$45.10
200 mLSYRP-SSORV200$45.10
Markez®1, 3 & 8 mL SYRP-SSORM8$275.00
5 mLSYRP-SSORM5$279.40
20 mLSYRP-SSORM20$308.00
50 mLSYRP-SSORM50$473.00
100 mLSYRP-SSORM100$462.00
200 mLSYRP-SSORM200$572.00

Plumbing Supplies
Plumbing Supplies

Plumbing Supplies

Peristaltic Pump Tubing

Plumbing Supplies

  • Dual Check Valve has a fixed male luer lock outlet port, female luer lock inlet port and female luer lock control port. 3 psi cracking pressure. Made with polycarbonate and silicone. Connects to syringe tip.
  • Female and Male Luer Barbs Fits 1/8" ID tubing.
  • "Y" Connector Barbed Fits 1/8" ID tubing (3.2 mm).
  • PVC Tubing is a special non-toxic formulation of the highest quality polyvinyl chloride and special plasticizers without extenders or fillers. Clear water-transparency and absolute flexibility with dimensional stability. Ideal for many applications in the laboratory, chemical and industrial plants.
  • Silicone Tubing is peroxide cured.
  • PTFE Tubing is a smooth, non-porous and dimensionally stable tubing.
  • Dual Pump Plumbing Kit is for use with our continuous infusion system or dual infusion system. The kit comes pre-assembled, just attach the syringes.
Back to Top
Description Model # Quantity of Price
Dual Pump Plumbing KitP-DKIT1$20.84
Dual Check Valve: Connects to Syringe Tip For Continuous Infusion / Refill Q-DVALVE1$4.00
Q-DVALVE-PK5050$184.00
Electronic Valve Control Interface:
Attach and control your electronic valve.
Pumping direction switches valve.
ADPT-VALVE-INTERFACE-1-US1$135.00
ADPT-VALVE-INTERFACE-2-US1$140.00
Connector: Luer Lock Female to Female
(Connects Syringe Tip to Syringe Tip)
Q-F2FL1$0.55
Q-F2FL-PK5050$25.00
Connector: Luer Lock to Barb, fits 0.125"ID tubing, Female
(Adds Luer Lock fitting to tubing. Connects to Syringe Tip)
Q-FL1$0.50
Q-FL-PK5050$23.00
Connector: Luer Lock to Barb, fits 0.125"ID tubing, Male
(Adds Luer Lock fitting to tubing)
Q-ML1$0.50
Q-ML-PK5050$23.00
"Y" Connector: Barbed, fits 0.125"ID tubing
(Splits 1 tube into 2, or merges 2 into 1)
Q-Y1$0.65
Tubing: 0.125"ID x 0.188"OD, PVCQ-T1251 ft$0.33
Q-T125-PK5050 ft$16.00
Tubing: 0.125"ID x 0.250"OD, SiliconeQ-TS1251 ft$2.50
Q-TS125-PK100100 ft$175.00
Tubing: 0.125"ID x 0.250"OD, PTFEQ-TPTFE12510 ft$66.00

Peristaltic Pump Supplies


Peristaltic Pump Tubing

Formulated to withstand the high temperatures frequently occurring during food and beverage processing, Food Grade Tubing will outlast and outperform virtually all other food grade tubing. Industrial Grade Tubing outlasts and outperforms other specialty rubber tubing. It will not weaken or crack after years of exposure to heat and ozone. Chemical Resistant Tubing provides the most flexibility, highest temperature resistance and longest pump life available in a clear, plasticizer/oil free tubing. Ultra Chemical Resistant Tubing is virtually unaffected by acids, bases, ketones, salts and alcohols fitting the requirements of many applications from battery acid filling to hazardous material handling.

Peristaltic tubing is only required within the pumping head. Before and after the pumping head, any type of standard tubing can be attached.


Peristaltic Pump Head Kits

The PERI-HEAD-KIT-YG4 is a 4 roller 1/16"ID tubing kit for low volume, higher precision dispensing. Maximum dispense rate is 75 mL/min. This kit includes green 4 roller head, 4 ft of PharMed® tubing, 8" nylon clamp ties, reduction couplers, and a vial of lubricant.

The PERI-HEAD-KIT-YB2 is a 2 roller 3/16"ID tubing kit. Maximum dispense rate is 775 mL/min. This kit includes blue 2 roller head, 4 ft of industrial grade tubing, 8" nylon clamp ties and a vial of lubricant.

The PERI-HEAD-KIT-HGC2 is a 2 roller 1/4"ID tubing kit. Maximum dispense rate is 1000 mL/min. This kit includes clear 2 roller head, 4 ft of industrial grade tubing, 8" nylon clamp ties and a vial of lubricant.

The PERI-HEAD-KIT-J2 is a 2 roller 5/16"ID tubing kit. Maximum dispense rate is 1500 mL/min. This kit includes yellow 2 roller head, 7" of industrial grade tubing, 2 couplers, and a vial of lubricant.

Please note: The actual dispensing values depend on the following:
• Line Pressure
• Liquid Viscosity
• Pumping Speed
• Calibration function improves accuracy.

Download Brochure  Back to Top
NE-9000B Accessories Description Model # Multiples
Of
Price
Per
NE-9000B Peristaltic Pump Head Kit
Blue Head with 2 Rollers
Industrial Tubing 3/16"ID x 5/16"OD x 1/16" Wall
Clamp Ties: Nylon, quantity 4; Vial of lubricant
PERI-HEAD-KIT-YB2each$67.29
Industrial Grade Tubing
3/16"ID x 5/16"OD x 1/16" Wall, Color: Black
Q-TP-IND1-3/165 ft$3.30 per ft
Food Grade Tubing
3/16"ID x 5/16"OD x 1/16" Wall, Color: Tan
Q-TP-FD1-3/16 5 ft$3.85 per ft
Chemical Resistant Tubing
3/16"ID x 5/16"OD x 1/16" Wall, Color: Clear
Q-TP-2001-3/1610 ft$5.50 per ft
Ultra Chemical Resistant Tubing
3/16"ID x 5/16"OD x 1/16" Wall, Color: Clear
Q-TP-2375-3/1610 ft$5.50 per ft
8" Nylon Clamp Ties
2 needed per head
Q-ZIPTIE-TSTeach $0.25
Silicone Grease Lubricant: 1 oz vial PERI-GREASEeach $4.00
NE-9000G Accessories Description Model # Multiples
Of
Price
Per
NE-9000G Peristaltic Pump Head Kit
Green Head with 4 Rollers
PharMed® Tubing 1/16"ID x 3/16"OD x 1/16" Wall
Clamp Ties: Nylon, quantity 4; Reduction coupler,
quantity 4; Vial of lubricant
PERI-HEAD-KIT-YG4each $129.15
PharMed® Tubing 1/16"ID x 3/16"OD x 1/16" Wall,
Color: Tan
Q-TP-PMED-1/16 5 ft $7.70 per ft
Food Grade Tubing
1/16"ID x 3/16"OD x 1/16" Wall, Color: Tan
Q-TP-FD1-1/16 5 ft$3.85 per ft
Reduction Coupler 3/32"ID x 1/16"ID
in High Density Polyethylene, 2 needed per head
Q-P3/32-1/16HDPE each $1.00
8" Nylon Clamp Ties
2 needed per head
Q-ZIPTIE-TSTeach $0.25
Silicone Grease Lubricant: 1 oz vial PERI-GREASEeach $4.00
NE-9004C Accessories Description Model # Multiples
Of
Price
Per
NE-9004C Peristaltic Pump Head Kit
Clear Head with 2 Rollers
Industrial Tubing 1/4"ID x 3/8"OD x 1/16" Wall
Clamp Ties: Nylon, quantity 4; Vial of lubricant
PERI-HEAD-KIT-HGC2each $127.58
Industrial Grade Tubing
1/4"ID x 3/8"OD x 1/16" Wall, Color: Black
Q-TP-IND1-1/45 ft$3.85 per ft
Food Grade Tubing
1/4"ID x 3/8"OD x 1/16" Wall, Color: Tan
Q-TP-FD1-1/4 5 ft$4.40 per ft
8" Nylon Clamp Ties
2 needed per head
Q-ZIPTIE-TSTeach $0.25
Silicone Grease Lubricant: 1 oz vial PERI-GREASEeach $4.00
NE-9010 Accessories Description Model # Multiples
Of
Price
Per
NE-9010 Peristaltic Pump Head Kit
Yellow Head with 2 Rollers
Industrial Grade Tubing 5/16"ID x 1/2"OD x 3/32" Wall
Coupler: Industrial, quantity 2; Vial of lubricant
PERI-HEAD-KIT-JY2each $195.00
Industrial Grade Tubing Assembly
5/16"ID x 1/2"OD x 3/32" Wall, 7" length, Color: Black
Coupler: Industrial, quantity 2
Q-TP-ASBLY-IND-5/16 each$25.00
Food Grade Tubing Assembly
5/16"ID x 1/2"OD x 3/32" Wall, 7" length, Color: Yellow
Coupler: Food Grade, quantity 2
Q-TP-ASBLY-FD1-5/16 each$27.00
Industrial Grade Tubing
5/16"ID x 1/2"OD x 3/32" Wall, Color: Black
Extra extension tubing. Not for use within pump head.
Q-TP-IND1-5/16 10 ft$3.35 per ft
Silicone Grease Lubricant: 1 oz vial PERI-GREASEeach $4.00

International Orders
New Era Pump Systems, Inc. product line is supported around the globe by our distribution network. You can order our products from our international distributors. Our syringe pumps are CE certified and we have international power supplies available. Click here for more important details.
New Era Pump Systems, Inc. has international distributors.

Not For Human Clinical Use
  About Us | Contact Us | © 2004 - New Era Pump Systems, Inc. | (631) 249-1392